VTech VSP600 (Base)

This base station is compatible with the VTech VSP601 cordless handset.

You do not need to dial any numerical prefix before dialing an extension or external number. Simply dial the extension or 10 digit number.

Pair Your Handset(s)

Up to six handsets can be paired with this base station.

1. Press the MENU key.

2. Select User settings > Registration > Handset > Next > Next.

3. On the base station, press and hold the Handset Locator key for 4 seconds until the LED light flashes red.

4. On the handset, press # on the handset to begin registration. The handset will then register within 10 seconds. If a pin number is required, try one of the following: 1590, 1591, or 1592.

Tip: To deregister your handset, select System Settings > Cancel Register > OK.

Assign a Line to Your Handset(s)

Each handset that is paired with this base station can be assigned a unique line.

Step 1: Add Lines to the Base Station

1. From the admin portal, click Devices in the left sidebar.

2. Click the VTech VSP600 that requires additional lines.

3. From the Button Configuration tab, select LINE and then choose the desired line.

4. Repeat step 3 for each additional line.

5. Click [SAVE].

Note: You must power cycle the base station to apply any changes made to its settings.

Step 2: Assign a Line to Each Handset

1. On the handset, press the MENU key.

2. Select Status > Network and then write down the phone’s IP Address.

3. Open an incognito window in Google Chrome, type the IP address into the address (URL) bar, and then press Enter on your keyboard.

Note: If the web UI does not load, enter https:// before the phone’s IP address.

4. Log in with: Username = admin and Password = admin.

Note: If this password is not accepted, contact Customer Support for assistance.

5. From the System tab, select Enable Account.

6. Click [Save].

7. From the Handset Settings tab, assign an Account to each HANDSET. This will be the line used for inbound calls.

8. Assign a Default Account to each HANDSET. This will be the line used for outbound calls.

9. Click [Save].

Note: You must power cycle the base station to apply any changes made to its settings.

Call Forwarding

Watch Video

1. Press the MENU key.

2. Select Features > Call forward, select Line.

3. Turn On the desired forwarding type.

  • Always: Forwards all incoming calls.
  • No Answer: Forwards all unanswered incoming calls.
  • Busy: Forwards calls that arrive when you’re already in a call.

4. Enter the internal extension or external number to which calls will be forwarded.

5. If you selected No Answer, enter how many rings to wait before forwarding.

6. Press the OK softkey.

*Softkeys are buttons located around the display whose function changes depending on the context. These keys are managed by your system administrator.

See a feature you don’t understand? See our phone feature glossary.

Call Handling Features

  • Warm Transfer
  • Blind Transfer
  • Do Not Disturb (DND)
  • Call Forward All
  • Call Forward Busy
  • Call Forward No Answer
  • Hold
  • Multi-way Calling
  • Anonymous Call Rejection
  • Call Waiting
  • On-hook Dialing
  • Speakerphone
  • Stutter Tone

User Interface Features

  • Call Logs
  • LDAP Directory
  • On Device Directory
  • Adjustable Ringer Volume

Feature Keys

  • 6 SIP Accounts*
  • Mute Button

*Supports up to 4 concurrent calls.

Display

  • Black & White Display
  • Message Waiting Indicator (MWI)
  • Caller ID (CID)
  • Time/Date Display
  • On-Screen Message Display

Network & Provisioning

  • PC Connection
  • Web Interface Provisionable

Hardware

  • VSP601 Wireless Handset
  • Wired Headset

Before you begin:

  1. Verify a device profile has been created.
  2. Verify the phone’s MAC address has been assigned to the device profile.

From the Web Interface (Web UI)

1. Press the MENU softkey.

2. Select Status Network and then write down the phone’s IP Address.

3. Open an incognito window in Google Chrome, type the IP address into the address (URL) bar, and then press Enter on your keyboard.

4. Enter the Device Admin Password. You can find this password within the Jive Administration Security tab.

Note: If this password is not accepted, contact Customer Support for assistance.

5. Go to Servicing > Provisioning.

6. Enter http://‹domain›.onjive.com/p for the Server URL.

Note: Replace ‹domain› with your unique domain (found in parentheses at the top of the admin dashboard).

7. Click [Save] > Reboot > [Reboot].

Note: Once your phone reboots, you must manually power cycle the device as well to apply its provisioning settings.

Reset Secure Provisioning

After a factory reset on a phone, you’ll need to reset secure provisioning from Jive Administration as well so it can reconnect to Jive.

1. Click Devices in the left sidebar.

2. Click the device that needs secure provisioning reset.

3. From the Hardware tab > Reset Secure Provisioning, click [RESET].

Was this help page useful? Send feedback.

Was this help page useful?


This form is to provide feedback on our help pages. if you need assistance, let's talk—we'd love to hear from you.