Support

Need to talk to us? Give us a call 877-548-3003

Customer Center

Cisco 7841

 Jive only supports Cisco 78xx models with PID VID 3PCC or 3PW below the SKU number.

You do not need to dial any numerical prefix before dialing an extension or external number. Simply dial the extension or 10 digit number.

Call Forwarding

Watch Video

1. Press .

2. Select User Preferences > Call Preferences.

3. Enter the internal extension or external number to which calls will be forwarded.

4. Highlight the desired forwarding type.

  • Forward All: Forwards all incoming calls.
  • No Answer: Forwards all unanswered incoming calls.
  • Busy: Forwards calls that arrive when you’re already in a call.

5. If you selected No Answer, enter how many rings to wait before forwarding.

6. Press the Set softkey (to disable call forwarding, turn Off the call forward mode).

Tip: While your phone rings, press the Decline softkey to forward the incoming call to your voicemail.

Do Not Disturb (DND)

Watch Video

Enabling DND stops your phone from ringing and sends all incoming calls directly to voicemail.  Calls are logged in your Missed Calls.

1. Press the DND softkey to enable/disable.

Voicemail Access

Watch Video

1. Press .

2. Dial your password (default 0000).

Speed Dial

Please contact your system administrator regarding your speed dial assignments.

3-Way Calls

Watch Video

1. While on an active call, press .

2. Dial the internal extension or external number to add to the conference.

3. Wait for the second party to answer, and then let them know that you would like to add them to a 3-way call.

4. Press  again.

Warm Transfer

Watch Video

Places a current call on hold and allows you to speak with the other party before transferring the call to them.

1. While on an active call, press .

2. Dial the internal extension or external number.

3. Speak with the destination party.

Tip: To cancel a warm transfer, look for the Cancel or EndCall softkey. This will take you back to the original call, or allow you to resume.

4. Press  again.

Blind Transfer

Watch Video

A blind transfer routes a call to another party without speaking to them first.

1. While on an active call, press thesoftkey.

2. Select the blindxfer softkey and then dial the internal extension or external number.

Tip: To transfer a call directly to voicemail, dial 0 + extension.

Hold

Watch Video

1. Press .

2. Press the Resume softkey to retrieve the call.

Modify Ringtone

Watch Video

1. Press .

2. Select User preferences > Audio PreferencesExt(n).

3. Enter the extension number.

4. Select the desired ringtone (highlight to sample ringtones).

5. Press the Set softkey.

Note: This device does not support silent ringtones.

Presence Monitoring

In order to presence monitor, you must have the feature enabled on your device by an administrator. If not enabled, contact your system administrator for assistance.

Note: The lines that you wish to monitor must be speed dial assignments on your phone.

*Softkeys are buttons located around the display whose function changes depending on the context. These keys are managed by your system administrator.

See a feature you don’t understand? See our phone feature glossary.

Call Handling Features

  • Warm Transfer
  • Blind Transfer
  • Do Not Disturb (DND)
  • Call Forward All
  • Call Forward Busy
  • Call Forward No Answer
  • Intercom (* + ext)
  • Hold
  • Reject
  • Multi-way Calling
  • Anonymous Call Rejection
  • Call Waiting
  • On-hook Dialing
  • Speakerphone

User Interface Features

  • Adjustable Ringer Volume
  • On Device Directory
  • LDAP Directory
  • Call Logs
  • Electronic Hook Switch (EHS)

Feature Keys

  • 4 SIP Accounts
  • 4 Upper Multifunction Keys*
  • Voicemail Button

*Supports line assignments.

  • Mute Button
  • On Device Speed Dial Edit

Display

  • Black & White Display
  • Message Waiting Indicator (MWI)
  • Caller ID (CID)
  • Shared Line Appearance (SLA)
  • Time/Date Display
  • On-Screen Message Display

Network & Provisioning

  • On Device Ethernet (PoE)
  • PC Connection
  • Gigabit Ethernet

*Up to two group subscriptions supported.

  • Cisco Multicast*
  • Web Interface Provisionable
  • Secure Provisioning

Hardware

  • Wired Headset*

*Utilizes AUX port and headset jack. EHS must be enabled.

Before you begin:

  1. Verify a device profile has been created.
  2. Verify the phone’s MAC address has been assigned to the device profile.

From the Phone Menu

Note: If you are prompted to enter a User password after booting up the phone, select Skip to proceed.

1. Press .

2. Select Device administration > Profile rule.

3. Enter http://‹domain›.onjive.com/p/$MA for the Profile Rule.

Note: Replace ‹domain› with your unique domain (found in parentheses at the top of the admin dashboard).

4. Press Resync.

Note: If the phone doesn’t automatically reboot, you must power cycle the device to apply its provisioning settings.

From the Web Interface (Web UI)

1. Press .

2. Select Status > Network status and then write down the phone’s IP Address.

3. Open an incognito window in Google Chrome, type the IP address into the address (URL) bar, and then press Enter on your keyboard.

Note: If the web UI does not load, enter https:// before the phone’s IP address.

4. Click Admin Login > advanced.

Note: If you are prompted to enter a password, enter the Device Admin Password. You can find this password within the Jive Administration Security tab.

5. Go to Voice tab > Provisioning tab.

6. Define the following Configuration Profile settings:

Provision Enable

Yes

Profile Rule

http://‹domain›.onjive.com/p/$MA

Note: Replace ‹domain› with your unique domain (found in parentheses at the top of the admin dashboard).

7. Click [Submit All Changes].

Note: If the phone doesn’t automatically reboot, you must power cycle the device to apply its provisioning settings.

Reset Secure Provisioning

After a factory reset on a phone, you’ll need to reset secure provisioning from Jive Administration so it can reconnect to Jive.

1. Click Devices in the left sidebar.

2. Click the device that needs secure provisioning reset.

3. From the Hardware tab > Reset Secure Provisioning, click [RESET].

Below is a list of known compatible accessories for your device supported by Jive.

Wired Headsets

Jabra BIZ 1500 Mono/Duo

Additional device required: Jabra Link 860

Jabra BIZ 2300 QD Duo/Mono

Additional device required: Jabra Link 860

Jabra BIZ 2400 II Series

Additional device required: Jabra Link 860

Jabra GN 2100 3-in-1/4-in-1

Additional device required: Jabra Link 860

Jabra GN 2120/2125 Duo

Additional device required: Jabra Link 860

Plantronics Blackwire C300/500/700 Series

No additional device required.

Plantronics Blackwire 5210/5220

No additional device required.

Plantronics EncorePro  HW510/HW510V

Additional device required: Plantronics Cable for Cisco IP Phone

Plantronics EncorePro  HW520/HW520V

Additional device required: Plantronics Cable for Cisco IP Phone

Plantronics EncorePro  HW530/HW540

Additional device required: Plantronics Cable for Cisco IP Phone

Plantronics EncorePro  HW710/HW720

Additional device required: Plantronics Cable for Cisco IP Phone

Wireless Headsets

Jabra Engage 65 & 75 Series

No additional device required.

Jabra Motion Office

No additional device required.

Jabra Pro 920 & 925 Mono/Duo

No additional device required.

Jabra Pro 9400 Series

No additional device required.

Plantronics CS 500 Series

No additional device required.

Plantronics Savi 700 Series

No additional device required.

Plantronics Voyager Focus UC

No additional device required.

Plantronics Voyager Legend CS

No additional device required.

Bluetooth

Plantronics Voyager 3200 UC

No additional device required.

Plantronics Voyager 6200 UC

No additional device required.

Plantronics Voyager 8200 UC

No additional device required.

Was this help page useful? Send feedback.

Was this help page useful?


This form is to provide feedback on our help pages. if you need assistance, let's talk—we'd love to hear from you.